Where to put a QR on a lorry, and what people actually report
A driver cannot see 80% of their own vehicle. Whoever is behind them sees all of it, and for hours has no way of saying so.
A heavy vehicle is checked at departure and on arrival. In between, the only people who see the trailer are the ones driving behind it: a blown light or a smoking brake is visible to fifty motorists before it is visible to you.
What the traffic behind you can see and you cannot
The rear and the offside are the two blind areas that matter. From there people notice a light that has gone, a flat tyre, a loose strap, a door that has given way, a leak leaving a trail on the tarmac and the smoke of a brake that is binding. On twin wheels, a deflated inner tyre carries on for miles without anything being felt in the cab — and destroys the outer one on the way.
Why nobody scans it at 60mph
Worth saying plainly: a QR cannot be scanned from a moving car, and designing for that is the fastest way to get no reports at all. The code is scanned from a standstill — at the services, at a toll booth, at the loading bay, at a red light. So it belongs where somebody standing next to the vehicle can read it: on the rear doors at eye height and on the side panel behind the cab, printed large (ten to fifteen centimetres across) so it can be caught from two or three metres.
One code per vehicle, not one per company
Label every code with the registration: the alert says which vehicle straight away and there is nothing to work out. For a fleet, send the alerts to whoever is on duty rather than to one driver — e-mail and Telegram together, so the warning also lands with somebody who is not at the wheel. And when a vehicle leaves the fleet you switch its code off without touching the others.
Frequently asked questions
Does the person reporting have to scan while driving?
No, and they do not need to. The code is scanned once the vehicle has stopped: whoever followed you for twenty miles catches you at the services and tells you there. That is still hours before the depot check.
Does the code expose the company's details?
No. The page shows only the options to tap: no registration, no company name, no contact details. The alert, carrying the label you chose yourself, reaches only the people who should get it.